26
ENG
ENGLISH
WATCHING TV
Assigning a station name
You can assign a station name with five
characters to each programme number.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to
select the position and make your choice of
the second character, and so on. You can
use an the alphabet A to Z, the number 0 to
9, +/ -, and blank and press OK .
5 Press the OK to store it.
6 When you return to the previous menu,
press BACK
ꕣ
.
Fine Tuning
Normally fine tuning is only necessary if
reception is poor.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for
the best picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu,
press BACK
ꕣ
.
Manually setting up pro-
gramme
Manual Tuning lets you manually tune and ar-
range the stations in whatever order you desire.
1 Press SETTINGS and the Navigation
buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number
buttons to select the desired programme
number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
1 0 Press the Navigation buttons and then
select the desired channel number with the
Navigation buttons or Number buttons.
1 1 Press the Navigation buttons to scroll to
Search.
1 2 Press the Navigation buttons to scroll and
start Searching.
1 3 Press the OK to store it.
1 4 When you return to the previous menu,
press BACK
ꕣ
.
NOTE
y
To store another programme, repeat steps
3 to 13.