10
ASSEMBLING AND PREPARING
ENGLISH
Protection cover
(Only 22LK33**)
1
Lay the TV with the screen side down on a flat
surface.
2
Remove the 2 screws and pull the stand away
from the TV.
3
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
Protection cover
Mounting on a table
Image shown may differ from your TV.
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the Power cord to a wall outlet.
Swivel 20 degrees to the left or right
and adjust the angle of the TV to
suit your view.(Except for 22LK33**,
19/22/26LV25**, 22/26LV55**,
19/22LV23**)
NOTE
Not using the Desk Type stand
Image shown may differ from your TV.
(Only 26/32LK33**, 32/37/42LK43**,
32/42/47LK53**, 32/37/42LK45**, 32/42LK55**,
47LK95**, 32/37/42LK46**)
1
Push the supplied Protection cover into the
opening at the bottom of the TV until clicking
sound.
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
To Next Page
Loading...
