4.8. Local Dimming Function Test
Step 1) Push the “Tilt” Key on Serivce remote control in Power
Only Mode.
Step 2) Confirm the Local Dimming mode.
Step 3) Press “exit” Key.
4.9. 3D function test
(Pattern Generator MSHG-600, MSPG-6100[Support HDMI1.4])
* HDMI mode NO. 872 , pattern No.83
1) Please input 3D test pattern like below (HDMI mode No.
872 , pattern No.83)
2) When 3D OSD appear automatically , then select OK key.
3) Don’t wear a 3D Glasses, Check the picture like below.
- 14 -
LGE Internal Use OnlyCopyright © 2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes
To Next Page
Loading...
