Copyright©2009 LG Electronics. Inc. All right reserved.
: Specifications and others are subject to change without notice for improvement
This spec is applied to PDP
Each part is tested as below without special appointment.
2) Relative Humidity: 65±10%
3) Power Voltage: Standard
Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is
4) Specification and performance of each parts are followed each drawing and
specification by part number in accordance with SBOM.
5) The receiver must be operated for
about 20 minutes prior to the
1) Performance : LGE TV test method followed.
2) Demanded other specification
Central and South America
Central and South America