LG Electronics. Inc. All rights reserved.
LGE Internal Use Only
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for
improvement
.
1. Application range
This specification is applied to the LED TV used
MS3553.PB765 chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CB, IEC specification
- EMC : CE, IEC/CISPR
4. Model General Specification
No.
Item
Specification
Remarks
1
Receiving System
NTSC-M, ATSC
2
Promramme coverage
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : US 01~135
5) CADTV : US 01~135
3
Input Voltage
AC 120V~, 60Hz
4
Screen Size
43 inch Wide (1920 ×1080)
5
Aspect Ratio
16:9
6
Module
LCM Model No.
Panel Model No.
Panel Maker
Resolution
Frame Rate
BOEI430WU1 HV430FHB-N40
BOE
FHD
60 Hz
7
Component & Com-
posite Input
Component + AV
Bottom : CVBS(Y), Pb, Pr
Bottom : Audio L/R
8
HDMI Input
HDMI2
Side
HDMI1
Bottom
9
USB
USB
Side (USB 2.0)
To Next Page
Loading...
