To Next PageTo Next PageWhat to do if audio function doesn't work on LG Digital Signage?
If the audio function does not work on your LG Digital Signage, check whether the audio cable is properly connected. Make sure the volume is adequately adjusted and the sound is set correctly. Try selecting the appropriate equalizer sound and re-adjusting the volume.
Why does 'Unknown Product' message appear on LG Digital Signage?
If the 'Unknown Product' message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
What to do if LG 43SM5C Digital Signage operation does not work normally?
If the operation of your LG Digital Signage does not work normally, check if the Timer is set and review the power control settings. Note that a power interruption could also be the cause.
How to fix no image on LG Led display?
If no image appears on your LG LED display, start by ensuring the power cord is securely plugged into the power outlet. Also, inspect the signal cable connection. You may also press the INPUT menu on the remote control to verify the input signal.
What to do if audio function does not work on LG 43SM5C?
If the audio function is not working on your LG Digital Signage, start by checking the audio cable to ensure it is properly connected. Next, adjust the volume settings and confirm that the sound is set correctly. You may also want to select an appropriate equalizer sound setting.
Why does the screen image look abnormal on my LG 43SM5C?
If the screen image on your LG Digital Signage looks abnormal, verify that the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set the resolution to the recommended setting in the Control Panel Display Setting menu. Also, ensure the correct input signal is connected to the appropriate signal port by using the corresponding signal cable.
How to fix no image on LG 43SM5C Digital Signage?
If no image appears on your LG Digital Signage display, first ensure the power cord is securely plugged into the outlet. Then, check the signal cable connection. Also, press the INPUT menu on the remote to verify the input signal. If the issue persists, your PC's graphics card signal might be outside the product's vertical or horizontal frequency range. Adjust the frequency range according to the specifications in the manual.
Why does my LG 43SM5C Digital Signage display 'Unknown Product'?
If the “Unknown Product” message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
How to prevent after-image on LG Digital Signage?
If an after-image appears on your LG Digital Signage and you use a fixed image for a long time, it may damage the pixels. Use the screen-saver function. Note that this is normal for LCD screen products.
What to do if the screen image looks abnormal on LG 43SM5C Digital Signage?
If the screen image looks abnormal on your LG Digital Signage, check if the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the [Control Panel] ? [Display] ? [Setting] menu. (The settings may differ depending on your operating system.) Also, ensure the proper input signal is connected to the signal port; connect the signal cable that matches with the source input signal.
General| Screen Size | 43 inches |
|---|---|
| Panel Type | IPS |
| Contrast Ratio | 1200:1 |
| Viewing Angle (H x V) | 178° x 178° |
| Response Time | 8 ms |
| Operating System | webOS |
| Internal Memory | 8 GB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Standby Power Consumption | 0.5W |
| VESA Mount | 200 x 200 mm |
| Resolution | 1920 x 1080 |
| Connectivity | HDMI, USB, Ethernet |
| Orientation | Landscape, Portrait |
| Power Consumption | 100 W |
| Brightness | 450 nit (Typ.) |
Keep away from heat sources like electrical heaters. Electrical shock, fire, malfunction, or deformation may occur.
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately.
Make sure to turn off the product. You may be electrocuted or the product can be damaged.
Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Do NOT install this product by yourself as you may injure yourself or cause damage to product.
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added.
The image may be different according to the model. Explains the function of each button on the remote control.
Assemble the cover with a screw as illustrated to prevent the USB memory from theft.
For certain models only. The image may be different according to the model.
For certain models only. The image may be different according to the model. Connect an input signal cable before installing speakers.
When you connect the cable to the product, the feature for receiving remote control signals is activated.
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
For certain models only. The image may be different according to the model. Instructions for removing and re-attaching the bracket.
For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Use VESA standard screws.
Some of the cables are not provided. This monitor supports the Plug and Play* feature.
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Shows the sequence for selecting input sources: RGB → HDMI → DVI-D → DISPLAYPORT → OPS.
