To Next PageTo Next PageHow to fix the audio on my LG 43SM5C Digital Signage?
If the audio function is not working on your LG Digital Signage, please check the following: * Ensure the audio cable is properly connected. * Adjust the volume settings. * Verify the sound settings are correctly configured. * Select the appropriate equalizer sound. * Adjust the volume again to ensure it is at a suitable level.
Why is the screen color abnormal on my LG 43SM5C Digital Signage?
If the screen color on your LG Digital Signage appears abnormal, try the following: * Set the number of colors to more than 24 bits (true color) by navigating to [Control Panel] ? [Display] ? [Settings] ? [Color Table] in Windows. Note that the exact settings location may vary depending on your operating system. * Check the connection status of the signal cable. * Re-insert the PC graphics card. Keep in mind that several pixels (red, green, blue, white, or black color) may appear on the screen, which is attributable to the unique characteristics of the LCD panel and does not indicate a malfunction.
What to do if no image is displayed on my LG Digital Signage?
If no image appears on your LG Digital Signage, ensure the power cord is correctly plugged into the power outlet. Also, check the signal cable and access the input menu to verify the input signal. If the signal from the PC (Graphics card) is out of the vertical or horizontal frequency range of the product, adjust the frequency range by referring to the Specifications.
Why is the screen color abnormal on my LG Led display?
If the screen color on your LG LED display is abnormal, set the number of colors to more than 24 bits (true color) via [Control Panel] ? [Display] ? [Settings] ? [Color Table] in Windows. Also, check the connection of the signal cable and re-insert the PC graphics card. Note that some red, green, blue, white, or black pixels may appear due to the LCD panel's characteristics, which is not a malfunction.
What to do if the audio function does not work on LG Led display?
If the audio function isn't working on your LG LED display, first check that the audio cable is properly connected. Then, ensure that the volume is appropriately adjusted and that the sound settings are correctly configured. Also, select the appropriate equalizer sound.
Why does my LG Led display screen image look abnormal?
If the screen image on your LG LED display looks abnormal, verify that the graphics card resolution and frequency are supported by the product. If the frequency is out of range, adjust it to the recommended resolution via the [Control Panel] ? [Display] ? [Setting] menu. Ensure the correct input signal is connected to the signal port using the appropriate signal cable.
General| Screen Size | 43 inches |
|---|---|
| Panel Type | IPS |
| Contrast Ratio | 1200:1 |
| Viewing Angle (H x V) | 178° x 178° |
| Response Time | 8 ms |
| Operating System | webOS |
| Internal Memory | 8 GB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Standby Power Consumption | 0.5W |
| VESA Mount | 200 x 200 mm |
| Resolution | 1920 x 1080 |
| Connectivity | HDMI, USB, Ethernet |
| Orientation | Landscape, Portrait |
| Power Consumption | 100 W |
| Brightness | 450 nit (Typ.) |
Keep away from heat sources like electrical heaters. Electrical shock, fire, malfunction, or deformation may occur.
If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately.
Make sure to turn off the product. You may be electrocuted or the product can be damaged.
Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Do NOT install this product by yourself as you may injure yourself or cause damage to product.
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added.
The image may be different according to the model. Explains the function of each button on the remote control.
Assemble the cover with a screw as illustrated to prevent the USB memory from theft.
For certain models only. The image may be different according to the model.
For certain models only. The image may be different according to the model. Connect an input signal cable before installing speakers.
When you connect the cable to the product, the feature for receiving remote control signals is activated.
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
For certain models only. The image may be different according to the model. Instructions for removing and re-attaching the bracket.
For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Use VESA standard screws.
Some of the cables are not provided. This monitor supports the Plug and Play* feature.
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Shows the sequence for selecting input sources: RGB → HDMI → DVI-D → DISPLAYPORT → OPS.
