Audio is played through the TV’s built-in speakers and the audio device connected to
the digital optical audio output port simultaneously.
Internal TV Speaker + Wired Headphones
Audio is played through the TV’s internal speakers and the Wired Headphones
simultaneously.
Some models may not be supported.
If you connect the wired headphones while the TV is powered on, it automatically detects
the wired headphones and redirects audio through them.
Performing Sound Test
Sound Sound Test
Start the Sound Test to check that the sound signal output is normal, and then select
whether there is an error.
If there are no problems in the test, check the connected external device or broadcast
signal.
Sound test is possible by Internal TV Speaker only.
Setting Volume Mode
Sound Additional Settings Volume Mode
Auto Volume
Set to On. This adjusts the volume automatically for each broadcasting company so
you can always listen to programme audio at the desired volume even after changing
programmes.
Volume Increase Amount
Select Low / Medium / High to adjust the volume range. Higher values increase
increments.
DTV Audio Setting
Sound Additional Settings DTV Audio Setting
When different audio types exist in an input signal, this function allows you to select the
audio type you want.
To Next Page
Loading...
