LG 43LX570M User Manual (English)

Other manuals for LG 43LX570M

Commercial Mode Setup Guide80 pages

Easy Setup Guide66 pages

Questions and Answers:

M
Margaret ChavezAug 16, 2025
Why is my LG 43LX570M remote not working?
- L
  Lindsay RushAug 16, 2025
  If your LG TV remote isn't working, ensure it's in TV Mode by using the MODE key, if applicable. Point the remote directly at the IR receiver on the TV. If the remote is too far away, move it closer, darken the room, and remove any obstructions blocking the path. Also, replace the batteries if they are weak, and ensure they are inserted with the correct polarity (+ and -). Finally, dim the room light if there's too much light interfering with the remote's signal. If none of these actions work, the remote IR codes may not match the settings in the TV. Make sure the Installer Remote is compatible and contact your LG representative if necessary. Check the settings both in the TV and on the remote.
J
Jared NguyenAug 22, 2025
What to do if no channels are present after Express Script on LG TV?
- W
  William MosleyAug 22, 2025
  If no channels are present on your LG TV after running the Express Script, it's likely that Auto Tuning was not run. Refer to the Express Script procedure to run Auto Tuning, which is necessary to populate the channel lineup. To reactivate the Express Script, restore the TV to a factory default condition.
V
Vincent DouglasAug 26, 2025
What to do if my LG TV has no picture?
- J
  jennifer84Aug 26, 2025
  If your LG TV shows no picture, first ensure that the TV is turned ON. If it is, check that the antenna or cable is correctly connected to the TV. Verify all connections to the TV are secure. If you're using an MPI device, ensure the MPI cable is connected. The issue could also be due to an encrypted program, so try switching to another channel. Finally, check and adjust the Installer Menu settings to ensure the correct tuning band is selected.
J
jessica51Aug 28, 2025
What causes communication error on my LG 43LX570M TV?
- C
  Charles HendersonAug 28, 2025
  If you encounter a Communication Error (Communications Timeout) on your LG TV, start by checking and connecting all communication cables. Ensure the TV power cord is connected and that the TV is turned ON, as determined by the default setting of Installer Menu item 118 POWER SAVINGS. If you're using the FTG Device Configuration Application, verify that you've selected the correct COM port for the cable being used.
L
Lisa SchultzAug 31, 2025
How to fix 'Inactive TV' message on LG TV?
- P
  Patrick McdonaldAug 31, 2025
  If your LG TV displays the message “Inactive TV” and then turns OFF, it's likely because the TV is set up to show this message when all channels are deleted from Channel Bank 4. To resolve this, simply select another channel bank (1, 2, or 3) to return the TV to normal operation.
P
Paul HumphreySep 3, 2025
How to fix LG 43LX570M TV when I cannot enter channel number directly?
- P
  perezlisaSep 3, 2025
  If you can't directly enter a channel number on your LG TV, it might be because the TV is in Pass-through Mode and Installer Menu item 028 CH. OVERIDE is set to 0, which disables direct keypad entry. To enable it, set 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter might not be included in the FTG Channel Map. If needed, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
J
Jennifer KellySep 6, 2025
Why channel found during auto tuning does not tune in with channel up/down on LG 43LX570M TV?
- M
  molly86Sep 6, 2025
  If a channel found during Auto Tuning on your LG TV doesn't tune in with the Channel Up/Down buttons, the channel was likely deleted in the currently selected channel bank. Premium channels may only be available on another channel bank. To resolve this, modify the channel bank allocation(s) for the channel using the FTG Channel Map Editor in the FTG File Manager.
C
Carla ReynoldsSep 9, 2025
Why is channel blanked in all channel banks on LG TV?
- F
  frank76Sep 9, 2025
  If a channel is blanked in all channel banks on your LG TV, it's because blanking a channel in one channel bank makes it blank in all. To restore normal operation, modify the channel attributes using the FTG Channel Map Editor in the FTG File Manager. Uncheck the “Blank Video” checkbox for the channel to restore it across all channel banks.
P
Patrick LoveSep 10, 2025
Why does my LG 43LX570M have normal picture but no sound?

LG 43LX570M Specifications

General

Panel life	- h
Pixel pitch	- mm
Response time	8 ms
Display diagonal	43 \
Display brightness	- cd/m²
Display technology	LED
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1200:1
Display number of colors	-
USB version	2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sound modes	Dynamic, Game, Music, News, Sports, Standard
RMS rated power	10 W
Impedance	8 Ω
Weight (without stand)	9979.03214 g
AC input voltage	110 - 127 V
AC input frequency	60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	42 W
Product design	Digital signage flat panel
Panel mounting interface	200 x 200 mm
Sustainability certificates	ENERGY STAR