Programmes Programme Tuning (Programme Tuning & Settings)
Signal Test
Shows the MUX and Service information etc.
Signal test is only available in Antenna or Cable mode.
Some models may not be supported.
Edit Programmes
You can edit the selected programmes from all the stored programmes or add / delete
them to / from the favourite programmes.
Edit All Programmes List
Programmes Programme Manager Edit All Programmes
You can lock or unlock the selected programmes from all the stored programmes, or you
can set them to be skipped when switching programmes.
Available features may vary depending on the broadcast signal.
Set the sorting option.
Lock the selected programmes or unlock the locked programmes.
Set the selected programmes to be skipped when switching programmes, or disable the
skipping option of the programmes previously set to be skipped.
: Move the selected programmes.
: Change the numbers of the selected programmes.
: Change the numbers of the selected programmes.
: Delete the selected programmes.
To Next Page
Loading...
