Connect via WPS PIN.
Connects easily when the PIN of the wireless AP that you wish to connect to is
entered in to the AP configuration webpage.
Advanced Wi-Fi Settings
If you input the information of network directly, you can enter a wireless network.
The IPv6 setup does not support Edit.
Using Device Connector
Connection Device Connector
This feature is to enable you to easily set the connection between the TV and external
devices.
Follow instructions in Device Connector.
Using Mobile TV On
Connection Mobile TV On
If Turn on via Wi-Fi or Turn on via Bluetooth is set to On, you can turn on your TV
using an application that supports Mobile TV On or see the screen of the application on
your TV.
The TV should be connected to a network.
The TV and the device to be used should be connected to the same network.
The Turn on via Wi-Fi feature must be used in an app on a smart device that supports the
feature.
The Turn on via Bluetooth feature can only be used with certain LG Electronics
smartphones.
The TV must be plugged in.
To connect for the first time, make sure the device to be used is ready to connect.
Some models may not be supported.
Screen Share Settings
Connection Screen Share Settings
You can press the Delete Pairing History to delete the connections of the devices
connected to the TV by the Screen Share.
To Next Page
Loading...
