LG 47CM565 - Important Safety Instructions; General Safety Precautions

Please call LG Customer Service if you experience any problems.
ENGLISH
Troubleshooting Network Problems
1

Press the SETTINGS button to access the main menu.
2

Select the NETWORK
→
Network Status menu.
NETWORK
Network Connection
Move OK
Network Status
Follow the instructions below that correlate to your network status.
Check the TV or the router.
Network Status
TV
Gateway
DNS
Internet
When an X appears between TV and Gateway.
1
Check the cable connection between the TV and the wired router.
2
Reset the power for both the TV and the router/cable modem.
3
If you use a fixed IP address and choose to set the IP address automatically, an X will appear
between TV and Gateway.
4
If you are not using a router, consult your Internet service provider for service.
Check the router or consult your Internet service provider.
Network Status
TV
Gateway
DNS
Internet
When an X appears between Gateway and DNS.
1
Check the router/cable modem.
- Unplug the router/cable modem, then plug it back in after 5 seconds.
- Press the Reset button on the router/cable modem.
2
If you are not using a router, consult your Internet service provider.
Network Status
TV
Gateway
DNS
Internet
When an X appears between DNS and Internet.
1
Unplug the router/cable modem, then plug it back in after 5 seconds.
2
Press the Reset button on the router/cable modem.
3
Check that the MAC address of the TV/router is registered with your Internet service
provider. (The MAC address displayed on the right pane of the network status window should
be registered with your Internet service provider.)
4
Check the router manufacturer’s website to make sure your router has the latest firmware
version installed.
Read the Owner's Manual to find out the system requirements.
1
Start Nero Media Home 4 and enable shared folders on your
PC.
»
»
. Click the Share button.
»
»
. Click the Add button and select the desired folder.
(Read the Owner's Manual to find out which file formats
support the DLNA function.)
2
Make sure that the PC network device is selected.
»
»
. Click the Network button and check that the correct PC
network device is selected. (At least one network device
must be selected.)
»
»
. Click the Start Server button.
3
You can view and enjoy shared content by using the TV’s My
Media function.
»
»
. Select DLNA Device on the TV’s My Media to enjoy
content from your PC.
Install the SmartShare PC SW (DLNA) program on your PC.
1

Go to www.lg.com. Then, select your region.
2

Select Support. Then, Search for your model.
3

Select Drivers & Software. Then, select SmartShare PC SW (DLNA).
4

You can run the program when installation is complete.
y
DLNA service is available if TV and other devices are connected via a single router.
SmartShare PC SW Installing & Setting
DLNA Connection to PC