LG 47LA6600 - Power Cord and Accessory Safety; Servicing and Environmental Warnings

ENGLISH
NETWORK SETTING
4
The device automatically tries to connect to the
network available (wired network first).
If you select Cancel or it fails to connect to the
network, the network list available is displayed.
Choose the network you wish to use.
For wireless AP (Router) that have the
ꔒ
symbol,
you need to enter the security key.
Wireless : AAA
5 The connected network is displayed.
Select Complete to confirm the network connection.
If you select the Other Network List, the available
network list is displayed again.
Troubleshooting Network Problems
1
Press the SMART
REC
button to access the Smart
Home menu. Select Settings and press Wheel (OK).

Settings
More
More
Settings
2
Select the NETWORK
→
Network Status menu.
My TV Name : 42LA6400-DA
Network Connection
Network Status
Wi-Fi Direct
Miracast
TM
/Intel's WiDi
NETWORK
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
TV Gateway DNS Internet
Network Status
When an appears on TV, but an X on Gateway.
1
Check the connection status of the TV, AP (Router)
and cable modem.
2
Power off and power on the TV, AP (Router) and
cable modem.
3
If you are using a static IP, enter the IP directly.
4
Contact internet companies or AP (Router)
companies.

Additional points to check when using a wireless
connection
1
Check the password for the wireless
connection in the AP (Router) settings
window.
2
Change the AP (Router) SSID (network name)
or the wireless channel.
Check the AP (Router) or consult your Internet
service provider.
TV Gateway DNS Internet
Network Status
When an appears on TV and Gateway, but an
X on DNS.
1
Unplug the power cord of the AP (Router), cable
modem and try to connect after 5 seconds.
2
Initialize (Reset) the AP (Router) or cable modem.
3
Con
tact internet companies or AP
(Router)
companies.
TV Gateway DNS Internet
Network Status
When an appears on TV, Gateway and DNS,
but an X on Internet.
1
Unplug the power cord of the AP (Router), cable
modem and try to connect after 5 seconds.
2
Initialize (Reset) the AP (Router) or cable modem.
3
Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider. (The
MAC address displayed on the right pane of the
network status window should be registered with
your Internet service provider.)
4
Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.