Please call LG Customer Service if you experience any problems.
ENGLISH
Installation & Setting
Install the SmartShare PC SW (DLNA) and SmartShare PC SW (MediaLink) program on your PC.
1
Go to www.lg.com. Then, select your region.
2
Select SUPPORT. Then, search for your model.
3
Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW (DLNA)
4
You can run the program when installation is complete.
DLNA service is only available if TV and other devices are connected via a single AP (Router).
NOTE
Updating the TV Firmware
HOME
→
Settings
→
SUPPORT
→
Software Update
By default, the TV will notify you of new software updates. You can use the Software Update menu to manually
check for available updates.
Software Update Set it to On.
When an updated file is detected, the file is downloaded automatically.
Automatic Update Mode If an update is available, the update automatically starts without prompting.
Check Update Version Checks the latest update version installed. When a new update is available, the
download process can be performed manually.
DLNA Connection to Smartphone
1
Check that Wi-Fi is enabled on your smartphone. To use DLNA, both devices must on the same local network.
2
Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
3
Enable your smartphone to share content files with other devices.
4
Select the file type you want to play (movie, audio or photo).
5
Select a movie, music or photo file to play on the TV.
6
Add the selected file to the playlist.
7
Select a TV model name on which to play the files. (The TV model name is on a label on the side of the TV and
in the customer support menu.)
8
Play the media file to view and enjoy it on your TV.
Miracast
TM
Setting
Wi-Fi Direct Setting
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
[Device Screen]
Miracast
TM
/ Intel's WiDi
The device which is applied Miracast
TM
and intel's WiDi
technology can be shown on the TV.
1
Miracast should be set to 'ON' on your mobile device And TV.
Go to the Network settings to set the Miracast.
2
When your TV or portable device is detected, select the device.
HOME
→
Settings
→
NETWORK
→
Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct.
With Smart Share, you can share files or screens of devices connected to Wi-Fi
Direct
.
1
If Wi-Fi
Direct
is set to On, a list of available devices
appears.
»
To use
Wi-Fi
Direct
, go to
Settings
→
NETWORK
and set Wi-Fi Direct ( ) to
On
.
2
When you are prompted to request connection, select Yes.
Wi-Fi
Direct
is now connected to your TV.
*
If you are not using
Wi-Fi Direct
to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct ( )
to Off. You can only use devices that support Wi-Fi
Direct
.
[Device Screen]
To Next Page
Loading...
