Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
For LM4600, LM5800 series
M4 x 20
4 EA
3
2
1
Front
Top View
Stand Body
Stand Base
M4 x 20
4 EA
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
NOTE
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with too much
force; otherwise they may be worn out
and get loosened.
CAUTION
ENGLISH
18
ASSEMBLING AND PREPARING
To Next Page
Loading...
