B-14
MAKING CONNECTIONS
Euro scart connection
Any Euro scart cable used must be signal
shielded.
When watching digital TV in 3D imaging
mode, monitor out signals cannot be output
through the SCART cable.
If you set the 3D mode to On while a
scheduled recording is performed on digital
TV, monitor out signals cannot be output
through the SCART cable, and the recording
cannot be performed.
NOTE
(Use the scart
gender cable
provided.)
(*Not Provided)
Current
input mode
AV1
(TV Out
1
)
AV1
(When DTV
scheduled
recording is
in progress
using recording
equipment.)
Digital TV Digital TV O
Analogue TV,
AV
Analogue TV
O
(The input mode
is converted to
DTV.)
Component/
RGB
HDMI
Output
Type
1 TV Out : Outputs Analogue TV or Digital TV signals.
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown. To display images by using progressive
scan, make sure to use the euro scart cable.
English