Why is there no sound on my LG 50PN4500 but the image is fine?
If you see images but hear no sound on your LG Plasma TV, try the following: 1. Press the VOL + or - button to increase the volume. 2. Check if the sound is muted by pressing the MUTE button. 3. Try other channels to rule out a broadcast issue. 4. Make sure the audio cables are securely connected. 5. Verify that the TV Speaker feature is activated in the menu.
What to do if my LG 50PN4500 Plasma TV remote control is not working?
If you're unable to control your LG Plasma TV with the remote, first check the remote control sensor on the TV and try again. Ensure there are no obstacles blocking the path between the remote and the TV. Finally, check that the batteries in the remote are working and properly installed.
Why does my LG 50PN4500 Plasma TV show 'No Signal'?
If your LG Plasma TV displays 'No Signal', ensure the signal cable is correctly connected between the TV and other devices. You should also verify the selected input source by pressing the INPUT button on your remote.
Why is there no sound on my LG 50PN4500?
If you're experiencing no sound from your LG Plasma TV while images are displaying, try the following: * Press the VOL + or - button to increase the volume. * Ensure the sound isn't muted by pressing the MUTE button. * Try tuning to other channels, as the issue might be with the broadcast itself. * Verify that the audio cables are properly connected. * Confirm that the TV Speaker feature is activated in the menu options.
What to do if LG 50PN4500 has no image and sound?
If your LG Plasma TV shows no image and produces no sound, ensure that the TV is turned on and that the power cord is securely connected to a working wall outlet. Test the wall outlet with other products to confirm it's functioning correctly.
Why does my LG Plasma TV turn off by itself?
If your LG Plasma TV suddenly turns off, check the power control settings to ensure the power supply isn't interrupted. Also, verify if the Auto sleep feature is enabled in the Time settings. If there's no signal while the TV is on, it will automatically turn off after 15 minutes of inactivity.
What to do if my LG 50PN4500 Plasma TV has no image and sound?
If your LG Plasma TV isn't displaying an image and there's no sound, start by verifying that the TV is powered on. Next, make sure the power cord is securely connected to a functioning wall outlet. You can test the outlet by plugging in another device to see if it works.
Why does my LG 50PN4500 turn off suddenly?
If your LG Plasma TV turns off suddenly, first examine the power control settings to ensure that the power supply isn't being interrupted. Also, check if the Auto sleep feature is enabled within the Time settings. If the TV doesn't receive a signal while it's on, it will automatically shut down after 15 minutes of inactivity.
What to do if my LG 50PN4500 turns off suddenly?
If your LG Plasma TV is turning off unexpectedly, check the power control settings to ensure the power supply isn't being interrupted. Also, see if the Auto sleep feature is activated in the Time settings. Note that the TV will automatically turn off after 15 minutes of inactivity if there is no signal.
How do I fix the display offset on my LG 50PN4500 Plasma TV?
General| Depth | 55.8 mm |
|---|---|
| Width | 1168 mm |
| Height | 698 mm |
| Weight | 23995 g |
| HD type | Not supported |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Photo, Standard |
| Audio system | Dolby Digital |
| Product color | Black |
| Noise reduction | Yes |
| RMS rated power | 20 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 50 \ |
| AC input frequency | 50 - 60 Hz |
| Built-in subwoofer | No |
| Composite video in | 0 |
| Depth (with stand) | 292 mm |
| Display brightness | - cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Number of speakers | 2 |
| Height (with stand) | 754 mm |
| High frequency rate | 600 Hz |
| Weight (with stand) | 25401 g |
| Supported video modes | 1080i, 1080p, 720p |
| USB 2.0 ports quantity | 1 |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Panel mounting interface | 400 x 400 mm |
| Annual energy consumption | - kWh |
| Power consumption (standby) | 0.3 W |
| Sustainability certificates | ENERGY STAR |
| Consumer Electronics Control (CEC) | SimpLink |
| Native aspect ratio | 16:9 |
Warnings and precautions regarding electric shock, water, heat, ventilation, and grounding.
Safety guidelines for power cord, grounding, and moving the TV.
Precautions for cleaning, ventilation, and handling the TV during use.
Procedures for cleaning the TV and preventing image burn.
Unpacking and preparing the TV for setup and use.
Identification and description of TV parts and remote control buttons.
Safe methods for lifting, moving, and transporting the television.
Step-by-step guide for attaching the TV stand to the unit.
Instructions for placing and securing the TV on a table.
How to adjust the TV's viewing angle for optimal comfort.
Guidance for securely mounting the TV onto a wall.
Methods for organizing and securing TV cables for a neat setup.
Explanation of each button's function on the remote control.
Guide for turning on the TV for the first time and initial settings.
Setting up, tuning, and editing TV channels for reception.
How to add, delete, or reorder channels in the list.
Steps to add, manage, and select favorite TV channels.
How to view details about the current TV program and broadcast information.
How to resize the image to fit the screen optimally for viewing.
Selecting different modes for optimized image and sound based on content.
How to select and manage external input sources connected to the TV.
Accessing frequently used menu settings quickly for adjustments.
Instructions for connecting USB flash drives and external hard drives to the TV.
How to navigate and view photos and music files stored on a USB device.
Steps to view image files saved on a connected USB storage device.
How to play music files from a connected USB storage device.
Overview of the main menu categories for TV settings customization.
Adjusting image size, quality, and effects for optimal viewing.
Adjusting sound quality, effects, and volume levels for the TV.
Setting up, tuning, and editing TV channels for reception.
Configuring clock, on/off timers, and sleep timer functions.
Customizing general language, input labels, and caption settings.
Setting passwords, blocking channels, and managing content ratings.
How to connect an antenna or cable box for TV signal input.
Diagram showing various external devices and their connection points on the TV.
Instructions for connecting players like HD receivers, DVDs, and VCRs.
Details on using HDMI for digital video and audio signal transmission.
How to connect devices using analog component video and audio cables.
Steps for connecting devices using analog composite video and audio cables.
How to connect a personal computer to the TV for display.
Methods for connecting a PC using HDMI or DVI to HDMI cables.
How to connect an external audio system for enhanced sound.
Using an optical audio cable to connect the TV to external audio devices.
Connecting USB storage devices for multimedia file access.
Using SIMPLINK for controlling connected HDMI-CEC devices.
Activating and navigating the SIMPLINK menu for device control.
Solutions for common problems like remote control, display, and power issues.
Solutions for problems related to no sound or unusual audio output.
Solutions for problems related to image color, lines, afterimages, and signal.
Statement regarding compliance with FCC rules for digital devices.
Notice of conformity with European directives for EMC and low voltage.
Explains the purpose and requirements of environmental labels on computers.
LG's commitment to environmental preservation and eco-friendly product development.
Guidance on proper recycling procedures for the monitor.
European directive for the disposal of electrical and electronic equipment.
To Next Page
