LG 50PZ95O-UA User Manual

65 pages

To Next Page

Order Number : GETEC-C1-10-243 FCC Part 15 subpart B

Test Report Number : GETEC-E3-10-133 Page 1 / 1

EUT Type: LED LCD TV/Monitor

FCC ID.: BEJ55LV3700UD

APPENDIX G

: USER’S MANUAL

Questions and Answers:

U
uwardAug 30, 2025
Why does the image appear slowly when my LG TV turns on?
- N
  Nicolas WilliamsAug 31, 2025
  If your LG TV displays an image slowly when turned on, note that the image is muted during the startup process, which is normal. If the image doesn't appear after a few minutes, unplug the TV for 30 seconds and try again.
B
Brian WalkerAug 31, 2025
Why is the reception on some channels poor on my LG TV?
- J
  James WrightAug 31, 2025
  If you're experiencing poor reception on some channels with your LG TV, try changing channels as there may be an issue with the broadcast. The station signal might be weak, so try adjusting the antenna. Check for any local interference from electrical appliances or power tools.
R
Ryan ObrienSep 1, 2025
What to do if my LG LCD TV has no picture and no sound?
- H
  Heather BrownSep 1, 2025
  If your LG LCD TV shows no image and produces no sound, first ensure the TV is turned on. Next, check that the power cord is properly connected to a working wall outlet. To verify the outlet, connect another device to it.
P
Pamela FletcherSep 1, 2025
Why is there no sound on my LG 50PZ95O-UA LCD TV but there is a picture?
- R
  Richard VillanuevaSep 1, 2025
  If your LG LCD TV displays images but produces no sound, first press the VOL + or - button to adjust the volume. Also, check that the sound is not muted by pressing the MUTE button. Try switching to other channels, as the broadcast itself may have an issue. Ensure the audio cables are correctly connected and that the TV Speaker feature is enabled in the menu.
M
Michele CarterSep 2, 2025
Why won't my LG 50PZ95O-UA LCD TV remote work?
- G
  Gregory BooneSep 2, 2025
  First, ensure there are no obstructions between the remote and the TV sensor. Then, check the batteries to confirm they are working and correctly installed. Finally, verify that the correct input mode (TV or VCR) is selected on the remote.
C
Cassidy RobinsonSep 2, 2025
What to do if there is no sound on my LG LCD TV?
- E
  Edward VillegasSep 2, 2025
  First, try pressing the volume + or - button. Ensure the sound isn't muted by pressing the MUTE button. Also, try switching to other channels, as the problem might be with the broadcast. Finally, check that the audio cables are properly connected.