23
ENGLISH_index
How to Join Sets
1 After joining the sets, use the tiling guide to adjust the gap between the sets.
(M3 x L4.5) x 44
2 Now the 2x2 tiling is complete. You can tile in various combinations, such as 3x3.
NOTE
• You may mount the set without using the tiling guide; this does not affect the performance of the device.
• The screws are enclosed with the other components in the box, including the tiling guides.
• Refer to Easy Setup Guide for a detailed connection diagram.
To Next Page
Loading...
Need help?
General
