Checking order
1, 2. Check IR cable condition between IR & Main board.
3. Check the st-by 3.3V on the terminal 6.
4. When checking the Pre-Amp when the power is in ON condition, it is normal when the Analog
Tester needle moves slowly, and defective when it does not move at all.
Standard Repair Process Detail Technical Manual
Remote controller operation checking method
D. Function error
A27
Established
date
Revised
date
Error
symptom
Content
LCD TV
A27
P4102
1
SCL
2
SDA
3
GND
4
KEY1
5
KEY2
6
St 3.5V
7GND
8GP4_LED_R
9IR
10 GND
①
②
③
④
2011. 12 .14
<XXG2-UG>
Copyright ⓒ 2012 LG Electronics. Inc. All right reserved.
Only for training and service purposes
To Next Page
Loading...
