ENG
ENGLISH
16
ASSEMBLING AND PREPARING
Using the Kensington security system
(optional)
(Depending upon model)
The Kensington security system connector is
located at the rear of the TV.
For more information of installation and
using, refer to the manual provided with the
Kensington security system or visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the TV and a table.
y
The Kensington security system is optional.
You can obtain additional accessories from
your local dealer.
NOTE
Securing the TV to a wall (optional)
(Depending upon model)
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
y
Make sure that children do not climb on or
hang on the TV.
CAUTION
y
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
y
Brackets, bolts and ropes are optional.
You can obtain additional accessories from
your local dealer.
NOTE
Tidying cables
1
Gather and bind the cables with the cable
management.
2
Gather and bind the cables with the cable
holder on the back of the TV.
Cable Holder
Cable Management
y
Do not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
CAUTION
To Next Page
Loading...
