ENGLISH
19
ASSEMBLING AND PREPARING
Securing the TV to a table
(For 60LA8600)
1
Connect the Desk-mount Cables to the Stand Base
using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using the Desk-
mount Screws.
3
Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
Method A
Desk-mount Cable
P4 x 10 P4 x 20
Method B
y
To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
WARNING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
y
Make sure that children do not climb on or hang on
the TV.
CAUTION
y
Use a platform or cabinet that is strong and large
enough to support the TV securely.
y
Brackets, bolts and ropes are optional. You can
obtain additional accessories from your local dealer.
NOTE
To Next Page
Loading...
