LG 55LB6500 - VCOM Adjustment

Standard Repair Process Detail Technical Manual
Se
q
uence of the Vcom ad
j
ustment
D. VCOM Adjustment
A28
Established
date
Revised
date
Error
symptom
Content
LCD TV
2013. 11 .30
qj
1. Case
■
LCD module change
date
■
LCD
module
change
■ T-Con board change
2. Equipment
■ Service Remote controller
3. Adjust sequence
■ Press the ‘adj’ key
■ select V-COM
■
As pushing the right or the left button on the remote controller, And find the V
-
COM value Which is no or
■
As
pushing
the
right
or
the
left
button
on
the
remote
controller,
And
find
the
V
COM
value
Which
is
no
or
minimized the Flicker.
(If there is no flicker at default value, Press the exit key and finish the VCOM adjustment.)
■ Push the OK key to store the value. Then the message “Saving OK” is pop.
■ Press the exit key to finish V-COM adjustment.
Copyright ⓒ 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only