EXTERNAL EQUIPMENT SETUP
,,,_To prevent the equipment damage, never plug in any power cords until you havefinished connecting all equipment.
""_This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 42/47/55LH90.
HD RECEIVERSETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.
r_
x
r_
_D
z
r_
X:)
c
r_
z
r_
c
Component Connection
I. How to connect
0
Connect the video outputs (Y, PB, PR) of the digital set-
top box to the COMPONENT IN VIDEO I or 2
jacks on the TV. Match the jack colors (Y = green, PB =
blue, and PR = red).
O Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO 1 or2 jacks on theTV.
2. How to use
01_Turn on the digital set-top box.
(Refer to the owner's manual for the digital set-top box operation.)
0_.Select the Component1 or 2 input source on the TV
using the INPUT button on the remote control.
Supported Resolutions
Y, CB/PB, CR/PR
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
15.73 59.94
15.73 60.00
31.47 59.94
31.50 60.00
44.96 59.94
45.00 60.00
33.72 59.94
33.75 60.00
26.97 23.976
2Z00 24.00
33.71 29.97
33.75 30.00
6Z432 59.94
6Z50 60.00
24
To Next Page
Loading...
