1. When setting up Media-Box at the cabinet and on th surface, etc
(1) If the surface distance becomes more than 20cm at [fig. 1],
wireless connection difficulty could be happened.
(2) Set up Media-Box making the surface distance as less than
20cm as possible.
(3) If the surface distance becomes more than 20cm unavoidably at
[fig. 2], a noise could be generated on the screen due to the drop
of wireless connection sensitivity.
(4) Improve wireless connection sensitivity by raising a wireless
emission angle using rubber (providing accessory).
2. When setting up Media-Box and TV, facing each other
If the surface distance on which Media-Box is placed becomes more than
20cm, wireless connection sensitivity could be dropped, and it is
recommended to use rubber.
3. In case setting up by using a reflection
The whole reflected distance shouldn’t be over 10m, and if
using a rubber according to the condition how Media-Box is
placed, wireless connection sensitivity improves. (a+b
distance should be smaller than 10m.)
- 14 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
MEDIA-BOX SETUP GUIDE
To Next Page
Loading...
