LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
1. Application range
This spec sheet is applied all of the 32”,37”, 42”, 47”, 55” LED
LCD TV with LA05E chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 20 ºC ± 5 ºC
2) Relative Humidity: 65 ± 10%
3) Power Voltage : Standard input voltage(100-120V~, 50/60Hz)
* Standard Voltage of each product is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : UL, CSA, IEC specification
- EMC: FCC, ICES, IEC specification
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
4. General Specification(TV)
No Item Specification Remark
1 Receivable System VSB/64 & 256 QAM/ NTSC-M
2 Available Channel VHF : 02 ~ 13
UHF : 14 ~ 69
DTV : 02 ~ 69
CATV : 01 ~ 135
CADTV : 01 ~ 135
3 Input Voltage 1) AC 100 ~ 120V 50/60Hz
4 Market North America
5 Screen Size 32 / 37 / 42 inches
6 Aspect Ratio 16:9
7 Tuning System FS
8 LCD Module EAJ61751501 V6 LC320EXN-SDA1 LG Philips LCD
EAJ61751801 V6 LC370EUN-SDV2 LG Philips LCD
EAJ61751705 V6 LC420EUN-SDV3 LG Philips LCD
EAJ61751601 V6 LC470EUE-SDV1 LG Philips LCD
EAJ61768501 V6 LC550EUF-SDA1 LG Philips LCD
9 Operating Environment Temp : 0 ~ 40 deg
Humidity : ~ 80 %
10 Storage Environment Temp : -20 ~ 60 deg
Humidity : -85 %
To Next Page
Loading...
