I
38
ENTERTAINMENT
WPS (Wi:Fi
Protecte<1
Setup)
•
..~
~-T
':
•••
If your router or
AP
has
a WPS button, it
is
the
easiest connection method.
You
simply press the
button
on
the router
and
then select the WPS on
the
TV
within 120 seconds.
1 Repeat step
1-7
on
"Connecting to a wireless
network".
2 Press the Navigation buttons to select the
Simple
setting
(WPs-button
mode).
3 Press the WPS button
on
your router.
4
Go
back to the
TV
and
select
Connect.
5 Repeat step
6-7
on
"Connecting to a wired
network".
Ad-hoc
Mode
Ad-hoc mode allows the
TV
to use a wireless to
connect
to
a computer without using a router or
access point.
1 Repeat step
1-5
on
"Connecting to a wireless
network".
2 Press the Navigation buttons to select
Setting
Ad-hoc
network
and
press
ENTER.
3 Press the Navigation buttons to select
Enter
and
press
ENTER.
4 Press
ENTER
to select
Connect
to connect Ad-
hoc network.
-
You
can
see the Network
ID
and
Security
Key
on
your
TV
screen.
- Enter this Network
ID
and
Security
Key
to
your device.
- When needed, you
can
change the setting
information using the
Red
button.
oNOTE
When searching for wireless networks
on
your
PC
using ad-hoc, the
TV
is
named
LGTV10.
•
LGTV1
0 that appears
in
the list. (Select
the same name
as
the network
ID
that
appears on your
TV
screen.)
5 Press the Navigation buttons to type
in
an
IP
address
and
press
ENTER.
Option
Description
• Internet Protocol(TCP/IP)
of
PC
needs to be set manually.
IP
address, Subnet Mask,
and
default Gateway
can
be
set with
PC
Setting
your own discretion.
» e.g.)
IP
address:
192.168.0.1 / Subnet Mask:
255.255.255.0/ default
Gateway: 192.168.0.10
• Verify
IP
address and gateway
of
PC.
Input Gateway address of
PC
to
IP
Address, and
IP
Address of
TV
Setting
PC
to
Gateway, and select Enter.
» e.g.)
IP
address:
192.168.0.10/ Subnet Mask:
255.255.255.0/ default
Gateway: 192.168.0.1
6 Press the Navigation buttons
to
select
Close
after Network setting
is
completed.
7 Press the
ENTER.
To Next Page
Loading...
