LG 55LX761H - Open Source Software Notice Information; Troubleshooting

14
ENGLISH
Supported Audio Formats
File Format Item Info
mp3
Bir rate 32 Kbps - 320 Kbps
Sample freq. 16 KHz - 48 KHz
Support MPEG1, MPEG2
Channels Mono, stereo
wav
Sample freq. ~384 kHz
Support PCM
Channels Mono, stereo
Ogg
Bir rate 64 Kbps - 500 Kbps
Sample freq. 8 kHz ~ 48 kHz
Support Vorbis
Channels Mono, stereo
wma
Bir rate - 1.5 Mbps
Sample freq. 8 kHz ~ 192 kHz
Support WMA
Channels Up to 8 ch
• The number of supported programmes may vary depending on the
sample frequency.
Supported Photo Formats
File Format Format Resolution
jpeg, jpg,
jpe
JPEG
Minimum: 64 x 64
Maximum: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
png PNG
Minimum: 64 x 64
Maximum: 5760 (W) x 5760 (H)
bmp BMP
Minimum: 64 x 64
Maximum: 1920 (W) x 1080 (H)
Open Source Software
Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit http://
opensource.lge.com .
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This oer is valid for three (3) years from the date
on which you purchased the product.
Troubleshooting
The software may be updated for improvement in performance. The
customer is responsible to ensure the compatibility of their equipment
with any LG Electronics software. If needed, please consult with LG
Electronics and update new software versions according to the guidance
provided by LG Electronics.
Cannot control the TV with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the Sleep Timer / Off Time is activated in the TIME
settings.
• If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), No signal or Invalid Format is
displayed.
• Turn the TV o/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.