To Next PageTo Next PageWhat to do if the 'No Signal' message appears on my LG 55VL5F Digital Signage?
If your LG Digital Signage displays a 'No Signal' message, first, check the signal cable to ensure it is properly connected. If the issue persists, access the input menu on your device to verify the correct input signal is selected.
How to adjust the screen position on LG Digital Signage?
If the screen position is wrong on your LG Digital Signage, you can try the following: 1. Press the button on the remote control to automatically select the optimal screen status. 2. Navigate to [PICTURE] ? [Screen] ? [POSITION] in the OSD menu. Also, if the graphics card resolution and frequency are not supported, set the resolution to the recommended settings in the Control Panel (Display) settings menu. You may also need to adjust the graphics card settings.
Why is my LG Digital Signage screen so dark?
If your LG Digital Signage screen appears extremely dark, try adjusting the brightness and contrast settings. If adjusting these settings doesn't resolve the issue, the backlight may need repair.
Why is the screen displayed abnormally on my LG Digital Signage?
If the screen of your LG Digital Signage is displayed abnormally, ensure that the correct input signal is connected to the signal port. Use the signal cable that matches the source input signal.
What to do if the 'Invalid Format' message appears on LG 55VL5F?
If your LG Digital Signage shows an 'Invalid Format' message, it means the signal from the PC (graphics card) is outside of the product's vertical or horizontal frequency range. To resolve this, adjust the frequency range by referring to the specifications in the manual.
How to fix thin lines on the screen of my LG 55VL5F?
If thin lines appear on the background screen of your LG Digital Signage, you can try pressing the button on the remote control to automatically select an optimal screen status. Alternatively, select [PICTURE] ? [Screen] ? [Size] in the OSD menu.
How to resolve horizontal noise on LG Digital Signage?
If you notice horizontal noise or blurred characters on your LG Digital Signage, try pressing the button on the remote control to automatically select an optimal screen status. You can also select [PICTURE] ? [Screen] ? [Phase] in the OSD menu.
Why does my LG Digital Signage screen flicker when I turn it on?
If your LG Digital Signage screen flickers when turned on, it might be due to the monitor being cold. This is normal.
Why is the screen color unstable on my LG 55VL5F Digital Signage?
If the screen color of your LG Digital Signage is unstable or mono-colored, check the connection status of the signal cable and re-insert the PC graphics card.
Why did my LG Digital Signage suddenly turn off?
If your LG Digital Signage suddenly turned off, check if the timer is set or review the power control settings. Also, consider if there was a power interruption.
General| Panel life | 50000 h |
|---|---|
| Response time | 8 ms |
| Display diagonal | 55 \ |
| Display brightness | 500 cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Contrast ratio (dynamic) | 500000:1 |
| Contrast ratio (typical) | 1200:1 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (typical) | 130 W |
| DVI-D ports quantity | 1 |
| Package depth | 828 mm |
| Package width | 1337 mm |
| Package height | 239 mm |
| Package weight | 30500 g |
| Orientation | Horizontal/Vertical |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (top) | 2.25 mm |
| Placement supported | Indoor/outdoor |
| Bezel width (bottom) | 1.25 mm |
| Panel mounting interface | 600 x 400 mm |
| Purpose | Commercial |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Sustainability certificates | ENERGY STAR |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 93.1 mm |
|---|---|
| Width | 1213.4 mm |
| Height | 684.2 mm |
| Weight | 23200 g |
