ENGLISH
8
CAUTION
Failure to observe these instructions may result in minor injury or damage to the product.
• Do not use or store the product near inflammables.
- This may result in fire or explosion.
• Take a break to protect your health and vision when using the product for long periods of time.
• Displaying a still image for a prolonged time may cause damage to the screen, resulting in image sticking.
- Damage incurred as a result of the above is not covered by the product warranty.
• Do not push hard on or scratch the product’s surface with your hands or sharp objects, such as nails, pencils or pens.
- This may damage the product’s surface and cause it to malfunction.
• Keep the product clean.
• Refer to the user guide and set the product to a fitting resolution and frequency. (For models with PC support only)
- You may experience blurred vision.
• Because the LCD requires high technology consisting of millions of pixels, pixilated spots (red, green, white or black)
may appear on the screen in some cases while using the product.
- This is normal for an LCD screen and is not a malfunction, nor is this related to the product’s performance.
• Do not leave the product in places where it is likely to get wet, and do not place anything containing liquid on top of
the product such as a flower vase.
• To clean the front frame, spray water onto a soft cloth two to four times; wipe in one direction only.
- Too much moisture may cause staining.
Precautions When Cleaning the Product
WARNING
Failure to observe these warnings may result in serious injury or death.
• Do not spray water directly onto the product and do not use inflammable materials such as thinner or benzene to
wipe the product.
- Doing so may cause fire or result in electric shock.
CAUTION
Failure to observe these instructions may result in minor injury or damage to the product.
• To clean the product, unplug the power cord and wipe it gently with a soft cloth.
When cleaning the product or the screen, do not use cleanser, automobile or industrial shiner, abrasive or wax,
benzene, alcohol, etc., as this may damage the product.
- This may result in fire, electric shock or product damage (deformation, corrosion or breakage).
To Next Page
Loading...
Need help?
General
