14 ASSEMBL NG AND PREPAR NG
Mounfing on a fable
1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from
the walt for proper ventilation.
2 Connect the power cord to a wall outlet.
Attach the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and tighten the
supplied screw on the rear of the stand.
_ WARNING
• To prevent TV from failing over the TV should be
securely attached to the floor/wall per installation
instructions Tipping shaking or rocking the TV
may cause injury
To Next Page
Loading...
