LG 65UH8500 - TUNER Input Signal Strength Checking Method

All Settings  Programmes  Programmes Tuning & Settings  Manual Tuning  Antenna DTV
Signal Strength is too strong : Use attenuator (-10dB, -15dB, -20dB etc.)
Signal Strength is too weak : Use Signal Booster
Standard Repair Process Detail Technical Manual
TUNER input signal strength checking method
A. Video error_Video error, video lag/stop
<ALL MODELS>
A3
Established
date
Revised
date
Error
symptom
Content
A3
Copyright © 2015 LG Electronics Inc. All rights reserved.
Only for training and service purposes
LGE Internal Use Only