LG 70UL3E-T User Manual

ENGLISH
25
15 [Equalizer] (Command : j v)
► Adjust EQ of the set.
Transmission
(j)(v)( )([Set ID])( )(Data)(Cr)
0 0 0 0 0 0 0 0
MSB
Frequency Data
LSB
7 6 5 Frequency 4 3 2 1 0 Step
0 0 0 1st Band 0 0 0 0 0 0(decimal)
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
0 1 0 3rd Band ... ... ... ... ... ...
0 1 1 4th Band 1 0 0 1 1 19(decimal)
1 0 0 5th Band 1 0 1 0 0 20(decimal)
Ack
(v)( )([Set ID])( )(OK/NG)(Data)(x)
* It depends on model, and can adjust when sound
mode is EQ adjustable value.
16 [Energy Saving] (Command: j q)
(Depending upon model)
► To reduce the power consumption of the monitor.
You can also adjust energy saving in picture
settings.
Transmission
(j)(q)( )([Set ID])( )(Data)(Cr)
Data 00 : [Off]
Data 01 : [Minimum]
Data 02 : [Medium]
Data 03 : [Maximum]
Data 04 : [Auto]
Data 05 : [Screen off]
Ack
(q)( )([Set ID])( )(OK/NG)(Data)(x)
17 Key (Command: m c)
► To send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )(Data)(Cr)
Data : Key code - page 18
Ack
(c)( )([Set ID])( )(OK/NG)(Data)(x)
18 Control Backlight (Command: m g)
► To control the backlight.
Transmission
(m)(g)( )([Set ID])( )(Data)(Cr)
Data Min : 00 to Max : 64
Ack
(g)( )([Set ID])( )(OK/NG)(Data)(x)
19 Input select (Command: x b) (Main Picture
Input)
► To select input source for main picture.
Transmission
(x)(b)( )([Set ID])( )(Data)(Cr)
Data 90 : HDMI1
Data 91 : HDMI2
Ack
(b)( )([Set ID])( )(OK/NG)(Data)(x)
* This function depends on model and signal.

LG 70UL3E-T Specifications

General

Brand	LG
Model	70UL3E-T
Category	Digital Signage
Language	English