LG 75XS2E-B.AUS - User Manual

Questions and Answers

J
Julia FrazierAug 10, 2025
What to do if my LG 75XS2E-B.AUS Digital Signage displays no image?
- T
  Thomas MillerAug 11, 2025
  If your LG Digital Signage is not displaying an image, start by checking if the power cord is properly connected to the power outlet. Then, inspect the signal cable and use the input menu to verify the input signal. Also, if the signal from the PC's graphics card is out of the product's vertical or horizontal frequency range, adjust the frequency range according to the specifications in the manual.
L
Lisa WilkinsAug 15, 2025
How to fix audio on LG 75XS2E-B.AUS?
- M
  Mark MontgomeryAug 15, 2025
  If the audio function on your LG Digital Signage isn't working, first ensure the audio cable is correctly connected. Then, adjust the volume and verify that the sound settings are properly configured. You may also want to select an appropriate equalizer sound and try adjusting the volume again.
R
robert79Aug 21, 2025
Why is the screen color abnormal on my LG 75XS2E-B.AUS?
- R
  Richard BonillaAug 21, 2025
  If the screen color on your LG Digital Signage appears abnormal, set the number of colors to more than 24 bits (true color) by going to Control Panel, then Display, Settings, and Color Table in Windows. Also, check the connection status of the signal cable and try re-inserting the PC graphics card. Note that several pixels (red, green, blue, white, or black color) may appear on the screen. This is not a malfunction of the LCD, but is attributable to its unique characteristics.
D
Darlene MartinAug 26, 2025
What to do if the screen image looks abnormal on my LG Digital Signage?
- D
  Daniel PadillaAug 26, 2025
  If the screen image on your LG Digital Signage looks abnormal, check if the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the 'Display' settings in Control Panel. Ensure that the proper input signal is connected to the signal port by connecting the signal cable that matches the source input signal.
H
heather69Aug 31, 2025
Why does after-image appear on my LG Digital Signage?
- T
  Tim JordanAug 31, 2025
  If an after-image appears on your LG Digital Signage, it may be due to using a fixed image for an extended period, which can damage the pixels. To prevent this, use the screen-saver function. Also, when a dark image is displayed after an image with high contrast (black and white or gray), image sticking may occur, which is normal for LCD screen products.
S
Sheila SparksSep 4, 2025
What to do if 'Unknown Product' message appears on LG 75XS2E-B.AUS?
- J
  Jeremy RobinsonSep 4, 2025
  If the 'Unknown Product' message appears when your LG Digital Signage is connected, check if the function is supported by referring to the graphics card user manual.

LG 75XS2E-B.AUS Specifications

General

Screen Size	75 inches
Resolution	3840 x 2160 (UHD)
Panel Type	IPS
Contrast Ratio	1200:1
Viewing Angle (H x V)	178 x 178
Response Time	8 ms (G to G)
Operating System	webOS
VESA Mount Standard	600 x 400 mm
Operation Hours	24/7
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 80%
Standby Power Consumption	0.5W
Input	HDMI, USB
Output	Audio Out
External Control	RS232C, RJ45
Surface Treatment	Haze 3%
Life Time	50, 000 hours
Orientation	Landscape & Portrait
Display Type	LED