13
EN
Remark Speed
High
Medium
Low
Natural Wind
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air without
changing the room temperature. 
1. Press 
d to turn on the power.
2. Press 
/.
- 
E is displayed on the display screen.
Adjusting the air flow
direction
1. To adjust the direction of the air flow
horizontally, press 
N repeatedly and
select the desired direction.
- Select 
: ; to adjust the direction of the
air flow automatically.
NOTE
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts to
operate with the previously set direction of air
flow, so the air deflector may not match the
icon displayed on the remote control. When
this occurs, press 
N to adjust the direction
of the air flow again.
Setting the timer
You can use the timer function to save energy
and to use the air conditioner more efficiently.
Setting the current time
1. Press  and hold it for longer than 3
seconds.
- The AM/PM icon flickers at the bottom of
the display screen.
3. Press 
g to adjust the fan speed.
Adjusting the fan speed
1. Press g repeatedly to adjust the fan
speed.
- Select 5 if you want natural air. 
The fan speed adjusts automatically.
2. Press 
E
or 
F
to select the minutes.
3. Press  to finish.
1,MFL67647015,영영  2019. 3. 8.  영영 1:56  Page 13