Auto operation
(Artificial intelligence)
Cooling-only models
In this mode, the fan speed and the
temperature adjust automatically, based on the
room temperature.
1. Press
d to turn on the power.
2. Press
f repeatedly to select auto
operation.
3. Press
G
or
H
to select the desired
operation code if the temperature is higher
or lower than the desired temperature.
Auto Changeover operation
Cooling & Heating Model
This mode changes the operation mode
automatically to maintain the set temperature
at ±2 °C.
1. Press
d to turn on the power.
2. Press
f repeatedly to select the auto
changeover operation.
-
C is displayed on the display screen.
NOTE
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector to
rotate automatically.
• This function may not be supported,
depending on the model.
3. Press
G
or
H
to set the desired
temperature.
- The temperature range is 18 °C (64 °F) ~
30 °C (86 °F).
4. Press
g repeatedly to select the fan speed.
NOTE
• This function may not be supported,
depending on the model.
1,MFL67647015,영영 2019. 3. 8. 영영 1:56 Page 16
To Next Page
Loading...
