149
Composing and Sending Email
You can send email to your contacts or to other people or groups.
To compose and send a message
1. While in the Email application, press the Menu Key and
touch Compose.
2. Enter an address for the message's intended recipient.
As you enter text, matching addresses are offered from your
Contacts. You can touch a suggested address or continue
entering a new one. Separate multiple addresses with
commas.
See
“
Contacts
”
on page 82 for more information.
3. Press the
Menu Key and touch Add Cc/Bcc to be able
to Cc or Bcc other contacts/email addresses.
4. Enter a subject for the message.
5. Enter the text of the message. For information about
entering text, see "Entering Text" on page 37.
6. Press the
Menu Key and touch Attach to send a photo
with the message.
7. Touch the
Send button.
If you're not ready to send the message, touch the Save as
draft
button to save it in a Drafts folder. Touch a draft
message in a Drafts folder to resume working on it. Your
message will also be saved as a draft if you touch the Back
Key
before sending it. Touch the Discard button to
abandon and delete a message, including any saved drafts.
If you aren't connected to a network, for example, if you're
working in airplane mode, the messages that you send are
stored in your Outbox folder until you're connected to a
network again. If it contains any pending messages, the
Outbox is displayed on the Accounts screen.
Email
To Next Page
Loading...
