Need help?Do you have a question about the LG ARNH763K3B2 and is the answer not in the manual?
Covers critical safety notices, warnings, and symbol explanations for safe product operation.
Details essential safety measures for unit installation, wiring, and handling electrical components.
Provides crucial safety instructions for operating and maintaining the Hydro Kit unit.
Compares features and compatibility of Hydro Kit Medium and High Temperature models.
Explains the model numbering system and lists technical specifications for Hydro Kit units.
Illustrates physical dimensions and external pipe/wire connection points for K2 and K3 models.
Covers procedures for unpacking, selecting installation sites, and safely transporting the unit.
Details methods for securely mounting and anchoring the Hydro Kit unit to its base.
Explains safe handling of refrigerant piping, cutting, brazing, support, and insulation.
Guides on water piping installation, circuit preparation, strainer, and antifreeze requirements.
Covers procedures for connecting power supply and dry contact interfaces to the unit.
Details routing, termination, and connection of communications cables for system control.
Introduces installation procedures for various optional accessories.
Shows the layout of control panels and terminal block connections for K2 and K3 models.
Explains wiring for group control configurations and thermostat installations.
Outlines final checks and site cleanup required before commissioning the installed system.
Guides on setting up group control, assigning central control addresses, and managing limitations.
Details the correct DIP switch settings for Hydro Kit Medium and High Temperature models.
Explains how to enter installer mode and configure unit functions using specific codes.
Describes the functionality of the Hydro Kit wall mounted controller display and buttons.
Explains how to operate the unit during emergency conditions and what functions are available.
Provides a schedule for routine maintenance tasks and operation tests for the Hydro Kit.
Lists available accessories, their models, connections, and uses.
Details error codes, causes, and troubleshooting steps for system malfunctions.
Comprehensive checklist to verify all installation tasks are completed correctly.
Template for recording device configuration details during pre-commissioning.
Provides contact details for technical support regarding freight, parts, and installation issues.
General| Model | LG ARNH763K3B2 |
|---|---|
| Voltage | 220-240V |
| Refrigerant | R410A |
| Power Consumption (Heating) | 2.11 kW |
| Phase | 1 |
To Next Page
