Why is my LG Air Conditioner showing error code 05?
Error code 05 on your LG Air Conditioner indicates a communication problem between the indoor and outdoor units. This is due to no signal communication between the two units. The suggested solution is to check for Error No. 05.
What does error code 01 mean on my LG Air Conditioner?
Error code 01 on your LG Air Conditioner indicates an air temperature sensor error. This is caused by either a disconnection or a short circuit in the air temperature sensor. The suggested solution is to check for Error No. 01.
What does it mean when my LG Air Conditioner displays error code 09?
If your LG Air Conditioner is displaying error code 09, it signifies an indoor unit EEPROM error. This is due to a communication problem between the microprocessor and the EEPROM or error due to EEPROM damage. The suggested solution is to check for Error No. 09.
What does error code 06 mean on my LG Air Conditioner?
Error code 06 on your LG Air Conditioner indicates a liquid side temperature sensor error. This is caused by either a disconnection or a short circuit in the liquid side temperature sensor. The suggested solution is to check for Error No. 06.
What does error code 02 mean on my LG Air Conditioner?
Error code 02 on your LG Air Conditioner indicates a gas side temperature sensor error. This is caused by either a disconnection or a short circuit in the gas side temperature sensor. The suggested solution is to check for Error No. 02.
What does error code 17 mean on my LG Air Conditioner?
Error code 17 on your LG Air Conditioner indicates a water inlet temperature sensor error. This is caused by either a disconnection or a short circuit in the water inlet temperature sensor. The suggested solution is to check for Error No. 17.
What does error code 18 mean on my LG Air Conditioner?
Error code 18 on your LG Air Conditioner indicates a water outlet temperature sensor error. This is caused by either a disconnection or a short circuit in the water outlet temperature sensor. The suggested solution is to check for Error No. 18.
General| Model | ARNH963K2A2 |
|---|---|
| Refrigerant | R410A |
| Power Supply | 380-415V, 3Ph, 50Hz |
| Operating Temperature (Cooling) | 18-43°C |
| Operating Temperature (Heating) | -5 ~ 24 °C |
Initial installation considerations and warnings for safe setup.
Guidelines for safe electrical and communication wiring installation.
General safety warnings for installation, operation, and maintenance.
Configuration for setting up group control for multiple Hydro Kits.
Setting DIP switches for both Hydro Kit Medium (K2) and High Temperature (K3) models.
Configuring installer settings via the remote controller.
Connecting multiple Hydro Kits for group control operation.
Guide to operating the Hydro Kit using the wall-mounted controller.
How to operate the unit in emergency mode and understand its limitations.
Explanation of error codes, LED displays, and how to interpret them.
Detailed list of Hydro Kit error codes, their types, and causes.
Final inspection steps to ensure installation completion before commissioning.
To Next Page
