9
Introduction
Due to our policy of continuous product innovation, some specications may change without notication.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Hydro Kit Models
This manual describes how to install the Multi V™ Hydro Kit. The Hydro Kit is available in two models. Refer to Table 1 for model chassis,
model number and capacities.
Table 1: Hydro Kit Model Numbers and Capacities
Unit Chassis Name Model Number Capacity
Hydro Kit Medium Temperature K2 ARNH963K2A2
Cooling: 95,900 Btu/h
Heating: 107,500 Btu/h
Hydro Kit High Temperature K3 ARNH763K3B2 Heating Only: 86,000 Btu/h
These units are to be used in conjunction with LG’s Multi V Variable Refrigerant Flow (VRF) Heating, and Air Conditioning system. Both units
operate on 208–230 V, 60 Hz, 1-phase power.
Install these unit(s) in the location(s) specied by your design engineer, HVAC system layout drawings and project specications. Perform the instal-
lation according to the procedures in this manual. Improper installation may result in injury to or death of personnel, equipment malfunction and/or
property damage.
More in-depth technical and performance information on these units is available in the Multi V™ Hydro Kit Engineering Manual available at
http://www.lg-vrf.com.
INTRODUCTION
HydroKit Medium Temperature (K2)
HydroKit High Temperature (K3)
To Next Page
Loading...
