16 Indoor Unit
Installation
16 Indoor Unit
Installation of Wireless Remote Controller
How to mount onto a wall
How to insert the batteries
1. Remove the battery cover by pulling it according to the arrow direc-
tion.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the batteries
to save their working life.
3. If the display screen of remote controller starts, fading replace both
of the batteries.
To Next Page
Loading...
