LG Art Cool Series - Group Control Setting; Master;Slave Setting

20 Indoor Unit
Installation
With the FAN SPEED button pressed, press the RESET button.
1
By using the TEMPERATURE SETTING button, set function code
and setting value. (Please refer the Installer Setting Code Table.)
2
Function Code
Setting Code
Press the ON/OFF button toward the indoor unit 1 time.
3
Reset the remote controller to use the general operation mode.
4
Master/Slave Setting
No. Function Function Code Setting Value Remote Controller LCD
0 : Set to Master
evalS ot teS : 1lortnoC puorG1
2 : Check Master/Slave
Installer Setting Code Table
2
Group Control Setting