Piping length and the elevation
Install the branch pipe so that pipe length and difference between high and low will not exceed below SPEC.
AUUH728C
AUUH488C
AUUH1008C
• When installing the branch pipe, direction and angle of installation is not limited.
• Take care so that burrs and foreign material may not enter into the cutting surface when connecting.
• Don’t use the liquid pipe by too bending or twisting. 
Pipe Length(m)
Total(Main+Branch)
Main Pipe(L1)
Branch Pipe----Total
Each
In out (h1)
In-In (h2)
L1+L2/L3/L4/L5
Indoor-Indoor_(b)
Spec.
110
50
60
15
30
1
65
10