Why LG ATNH36GNLE2 Air Conditioner does not cool or heat effectively?
Ineffective cooling or heating could be due to an incorrect temperature setting. Also, check if the air inlet or outlet vents of the indoor unit are obstructed.
What to do if filter sign lamp (LED) is ON on my LG ATNH36GNLE2 Air Conditioner?
If the filter sign lamp (LED) is on, clean the filter. After cleaning, press the Timer button and the '?' button on the wired remote controller simultaneously for 3 seconds.
What to do if my LG ATNH36GNLE2 Air Conditioner does not operate?
First, check if you've made any mistakes in setting the timer. Also, verify whether a fuse has blown or if the circuit breaker has been tripped.
What to do if error code occurred on LG ATNH36GNLE2 Air Conditioner after lightning struck?
The error code appeared because the over current protection circuit has been activated. This is normal behavior, and the unit should operate normally after a few minutes.
Why LG ATNH36GNLE2 does not operate for about 3 minutes when restart?
The air conditioner's delay in restarting is due to a built-in mechanism protector. Please wait approximately three minutes, and the operation will begin automatically.
Covers grounding, circuit breakers, wiring, and multi-consent precautions.
Guidelines for handling power cords, including damage, extension, and connection safety.
Precautions for installation stands, outdoor unit placement, and water sources.
Warnings on special uses, handling parts, filters, batteries, humidity, and cleaning.
Details on indoor/outdoor units, remote controllers, piping, and other system parts.
Explains the buttons, display, and functions of the wired remote controller.
Information on the optional wireless remote controller, its operation, and limitations.
Guides through Standard Cooling, Power Cooling, Heating, Dehumidification, Fan, and Auto modes.
How to adjust wind power, direction, set temperature, and check room temperature.
Instructions for Plasma Purification, Child Lock, Change Temp, Elevation Grill, and Filter Sign Clear.
Covers adjusting Vane Angle Control and setting the current time on the unit.
Details on setting Simple, Weekly, Sleep, ON, OFF, and Holiday reservations.
Explains operation when the unit is interlinked with a ventilation product.
Procedures for cleaning the unit, case, remote, and regular air filters.
Steps for cleaning and replacing the optional plasma purifying filter.
Tips for efficient use and preparing the unit for long-term non-operation.
Solutions for common problems and guidance on when to contact service.
General| Heating Capacity | 4.0 kW |
|---|---|
| Refrigerant | R32 |
| Type | Split Air Conditioner |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 19 dB(A) (Low) |
To Next Page
![Preview: LG ATNH24GPLED[UT24 NPD]](https://data.easymanua.ls/products/561090/200x200/lg-atnh24gpled-ut24-npd.webp)