EasyManua.ls Logo

LG ATUQ22GPLA4 - User Manual

LG ATUQ22GPLA4
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please read this installation manual completely before installing the product.
Installation work must be performed in accordance with the national wiring
standards by authorized personnel only.
Please retain this installation manual for future reference after reading it
thoroughly.
Copyright © 2016 - 2019 LG Electronics Inc. All Rights Reserved.
www.lg.com
ENGLISH
Question and Answer IconNeed help?

Do you have a question about the LG ATUQ22GPLA4 and is the answer not in the manual?

Summary

Tips for Saving Energy

Important Safety Instructions

Installation of Outdoor Unit

Installation Places

Guidelines for selecting suitable locations for the outdoor unit, considering sunlight, space, and noise.

Piping Length and Elevation

Specifications for piping length and elevation differences between indoor and outdoor units for different models.

Wiring Connection

Electrical Wiring

Instructions for performing electrical wiring work, including power sources, ELCBs, and circuit breakers.

Connecting Indoor and Outdoor Unit Cables

Details on connecting power cords and communication cables between indoor and outdoor units, including specifications.

Connecting Cable to Outdoor Unit

Procedure for connecting the power cable to the outdoor unit, including earthing work and caution points.

Connecting Pipes

Piping Preparation

Steps for preparing pipes for connection, including cutting, burr removal, and putting on nuts.

Flaring Work

Instructions on performing correct flaring work on copper tubes using a flaring tool and checking the results.

Connecting Pipes to Outdoor Unit

Guidance on tightening flare nuts on the outdoor unit's pipe connections using torque wrenches.

Preventing Foreign Objects Entry

Instructions for sealing pipe through-holes with putty or insulation to prevent entry of foreign objects.

Forming the Piping

How to wrap and secure the connecting portion of the indoor unit with insulation and tape, and route drain hoses.

Leakage Test and Evacuation

Leakage Test Preparation

Checks to be made before leakage testing and evacuation, including tube connections and valve status.

Leakage Test Procedure

Procedure for performing a leakage test using nitrogen gas and liquid soap to detect leaks in the system.

Evacuation Procedure

Steps for evacuating the tubing and indoor unit using a vacuum pump to remove air and moisture.

Finishing the Job

Final steps after evacuation, including opening valves, removing hoses, and securing connections to prevent leaks.

Test Running

Test Running Precautions

Important precautions before and during the test run, including power supply and operation modes.

Post-Installation Checks

List of items to check after installation is complete, including performance measurements and physical checks.

Power Supply Connection

Instructions for connecting the power supply cable and circuit breaker for the test run.

Performance Evaluation

How to measure and evaluate the air conditioner's performance during the test run, focusing on temperature differences.

Installation Guide at the Seaside

Seaside Location Selection

Advice on selecting outdoor unit locations in seaside areas, considering sea wind and corrosion.

LG ATUQ22GPLA4 Specifications

General IconGeneral
BrandLG
ModelATUQ22GPLA4
CategoryAir Conditioner
LanguageEnglish

Related product manuals