WIRING CONNECTION
13
ENGLISH
Connecting the cable to Outdoor Unit
Remove the side panel for wiring connection.
Use the cord clamp to fix the cord.
Earthing work
- Connect the cable of diameter more to the earthing terminal provided in the control box and do
earthing.
Connecting cable terminal
Power cord terminal
Cord clamp
* Make sure the rubber bushes are
properly used in knock-out holes after
connecting main power.
• The circuit diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that not to be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
• The Power cord connected to the unit should be selected according to the following speci-
fications.
CAUTION
!
To Next Page
Loading...
