LG AUUW096D - Installation to Decorative Panel

Installation Manual 33
ENGLISH
Installation to Decorative Panel
1. Remove the air inlet grille from the decoration panel.
2. Temporarily fix two decoration panel on the unit body.
The fixing screws (hexagon M5 screw) are included the indoor unit box.
3. Tighten completely four screws.
4. Connect the louver motor connector and display connector.
5. Install the air inlet grille (including the air filter).
Air conditioner unit
Decoration panel
Control box cover
Inlet Grille
The decoration panel has its
installation direction.
Before installing the decoration panel,
always remove the paper template.
Installation to Decorative Panel
Air conditioner
unit
Ceiling
board
Decoration panel
Decoration
panel
Fit the insulator (this part) and
be careful for cool air leakage
Good example
Air
Cool air leakage
(no good)
Bad example
Ceiling
board
Air conditioner unit
CAUTION : Install
certainly the
decoration panel.
Cool air leakage
causes sweating.
 Water drops fall.
1,MFL67855401,영영 2017. 6. 29. 영영 1:50 Page 33