To Next PageTo Next PageWhy LG AUUW488D2 does not cool or heat effectively?
Ineffective cooling or heating could be due to an incorrect temperature setting. Also, check if the air inlet or outlet vents of the indoor unit are obstructed.
What to do if filter sign lamp (LED) is ON on my LG Air Conditioner?
If the filter sign lamp (LED) is on, clean the filter. After cleaning, press the Timer button and the '?' button on the wired remote controller simultaneously for 3 seconds.
What to do if my LG AUUW488D2 Air Conditioner does not operate?
First, check if you've made any mistakes in setting the timer. Also, verify whether a fuse has blown or if the circuit breaker has been tripped.
What to do if error code occurred on LG AUUW488D2 Air Conditioner after lightning struck?
The error code appeared because the over current protection circuit has been activated. This is normal behavior, and the unit should operate normally after a few minutes.
Why LG AUUW488D2 does not operate for about 3 minutes when restart?
The air conditioner's delay in restarting is due to a built-in mechanism protector. Please wait approximately three minutes, and the operation will begin automatically.
General| Brand | LG |
|---|---|
| Model | AUUW488D2 |
| Category | Air Conditioner |
| Language | English |
Details the functions and operation of the wired remote controller unit.
Explains the usage and features of the optional wireless remote controller.
Guides on performing standard cooling operations.
Explains how to quickly cool the room using power cooling mode.
Details how to operate the air conditioner in heating mode.
Describes how to remove humidity from the air.
Explains the automatic mode that switches between cooling and heating.
Details on cleaning and maintaining the air filters.
Lists common problems and their solutions for self-diagnosis.
Identifies critical situations requiring immediate professional service.
