Controlled by _LCD_CS, LCD_RESET, _WR, DATA[00:15], LCD_ID,
•_LCD_CS : MAIN LCD driver chip enable. MAIN LCD driver IC has own CS pin
•LCD_RESET : This pin resets LCD module. This signal comes from DBB directly.
•_WR : Write control Signal
•_DATA[00:15] : Parallel data lines.
•LCD_ID[1:2] : LCD type selection signals-LCD_ID1 : LCD maker
(2.4V is SII, 0V is HyeLCD)-LCD_ID[2:3] : for the future using
•Forusing 65K color, data buses should be 16 bits.
3.7 Display and Interface