ENGLISH
11
INSTALLATION
Removing/Assembling the
Refrigerator Door Handles
Removing the Handles
1
Loosen the set screws with a
3
/
32
in. Allen wrench and
remove the handle.
2
Only if required, loosen the mounting fasteners that
connect to the refrigerator door and handle using a
1
/
4
in.
Allen wrench, remove the mounting fasteners.
Assembling the Handles
1
If already removed, assemble the mounting fasteners at
both ends of the handle using a
1
/
4
in. Allen wrench.
2
Place the handle on the door by fitting the handle foot-
prints over the mounting fasteners and tightening the set
screws with a
3
/
32
in. Allen wrench.
N O T E
Removing the doors is always recommended when it
is necessary to move the refrigerator through a nar-
row opening. If it is necessary to remove the handles,
follow the directions below.
Mounting
Fasteners
Set Screw
Allen
Wrench
Mounting
Fasteners
To Next Page
Loading...
